The VAL6 Daystar PH1 Infrared Diesel and Kerosene Heater is a compact professional heater designed for focused heating in workshops, garages, warehouses, construction areas and other suitably ventilated working environments.
Its dual heating system combines infrared radiant heat with forced air, delivering heat directly towards people, equipment and working areas rather than relying only on warming the surrounding air. With a heat output of 51,600 BTU/h and a dry weight of 18kg, the Daystar combines effective spot heating with a portable design.
The PH1 operates from a 230V / 50Hz electrical supply and can be fuelled using kerosene or No. 1 diesel. A 10-litre fuel tank and fuel-consumption rate of approximately 1.5 litres per hour support extended heating between refills.
Dual Radiant and Forced-Air Heating
The VAL6 Daystar differs from a conventional fan heater by combining two methods of heat distribution.
Infrared radiant heat travels directly towards people and solid surfaces, providing focused warmth without first heating the entire volume of air. The forced-air system helps distribute additional heat around the immediate working area.
This dual system makes the Daystar particularly useful for spot heating in larger, draughty or partially open professional environments where heating the complete space may be inefficient.
Key Features and Benefits
- Dual infrared radiant and forced-air heating system
- Heat output of 51,600 BTU/h
- Equivalent heat output of approximately 15.1kW
- Suitable for focused spot heating
- Operates using kerosene or No. 1 diesel
- 10-litre integrated fuel tank
- Fuel consumption of approximately 1.5 litres per hour
- Compact and portable 18kg design
- 230V / 50Hz electrical supply
- Maximum electrical consumption of 130W
- Tip-over safety switch
- Photocell flame-monitoring system
- Five-second pre-purge control
- Thermostat connector
- Compact footprint for transport and storage
Suitable Applications
The VAL6 Daystar PH1 is suitable for spot heating in properly ventilated environments including:
- Workshops
- Garages
- Warehouses
- Construction and maintenance areas
- Agricultural buildings
- Machinery and equipment work areas
- Loading areas
- Industrial workstations
- Vehicle-maintenance facilities
- Large or draughty professional spaces
Application note: The heater is designed for targeted professional heating. Suitability depends on the size, ventilation and conditions of the intended working area.
Technical Specifications
| Specification | Details |
|---|---|
| Brand | VAL6 |
| Model | PH1 |
| Daly Industrial Supply Product Code | HRP0001B |
| Heater Type | Infrared radiant and forced-air heater |
| Heat Output | 51,600 BTU/h |
| Heat Output | 13,000kcal/h |
| Approximate Heat Output | 15.1kW |
| Fuel | Kerosene or No. 1 diesel |
| Fuel Consumption | 1.5 litres per hour |
| Fuel-Tank Capacity | 10 litres |
| Electrical Supply | 230V / 50Hz |
| Maximum Power Consumption | 130W |
| Control System | Five-second pre-purge |
| Flame Monitoring | Photocell |
| Tip-Over Switch | Yes |
| Thermostat Connector | Yes |
| Dimensions | 593 × 310 × 600mm |
| Dry Weight | 18kg |
Portable Spot Heating
At 18kg, the Daystar is the most portable heater in the VAL6 range. Its compact dimensions make it easier to position where focused heat is required and to move between appropriate working areas.
The infrared heating system is particularly useful when heat needs to be directed towards a specific person, surface or workstation instead of heating an entire building.
Always switch the heater off and allow it to cool fully before moving, refuelling or storing it.
Safety Features and Operating Guidance
The Daystar PH1 incorporates a photocell flame monitor and tip-over switch. Its control system also performs a five-second pre-purge as part of the operating sequence.
These features support safe operation but do not replace correct positioning, ventilation and supervision.
Important: Use the heater only in a suitably ventilated area and follow the manufacturer’s operating instructions. Combustion heaters produce exhaust gases, including carbon monoxide, and must not be used in enclosed or poorly ventilated spaces.
Keep the heater away from flammable materials, combustible dust, fuel containers and obstructed exits. Never refuel the heater while it is operating or still hot.
Why Choose the VAL6 Daystar PH1?
The VAL6 Daystar PH1 combines focused infrared heating with forced-air distribution in a compact professional heater. Its 51,600 BTU/h output makes it suitable for heating individual work areas without attempting to heat the entire surrounding space.
The 18kg design is easy to reposition between suitable work areas, while the 10-litre fuel tank supports extended operation. The ability to use kerosene or No. 1 diesel provides additional flexibility for professional users.
Frequently Asked Questions
What is the heat output of the VAL6 Daystar?
The VAL6 Daystar PH1 produces 51,600 BTU/h, equivalent to 13,000kcal/h or approximately 15.1kW.
Which fuels can the Daystar PH1 use?
The heater is designed to operate using kerosene or No. 1 diesel. Always use fuel that meets the manufacturer’s requirements.
What size is the fuel tank?
The Daystar PH1 has a 10-litre integrated fuel tank.
How much fuel does it consume?
The stated fuel-consumption rate is approximately 1.5 litres per hour. Actual consumption may vary according to operating conditions and fuel quality.
Does the heater require electricity?
Yes. The Daystar requires a 230V / 50Hz electrical supply and has a maximum electrical consumption of 130W.
Is the VAL6 Daystar a radiant heater or a fan heater?
It uses a dual heating system combining infrared radiant heat with forced-air heating.
Can the Daystar be used in an enclosed room?
The Daystar is a fuel-burning heater and must only be operated with suitable ventilation. It should not be used in enclosed or poorly ventilated spaces.
Does it have a thermostat?
The heater has a thermostat connector. Thermostat equipment should be selected and installed in accordance with the manufacturer’s instructions.
Is the Daystar portable?
Yes. The PH1 has a dry weight of 18kg and compact dimensions of 593 × 310 × 600mm, making it suitable for movement between appropriate work areas.
VAL6 Heaters from Daly Industrial Supply
Daly Industrial Supply supplies VAL6 infrared heaters, spare parts and professional heating equipment from Cork.
If you need help determining whether the Daystar PH1 is suitable for your premises or application, contact Daly Industrial Supply on 021 450 0051.
| Model | PH1 |
|---|---|
| Fuel | Kerosene, #1 Diesel |
| Fuel Consumption | 1.5 l/h |
| Tip-over switch | |
| Power consumption | 130W (max) |
| Power source | 230V/50Hz |
| HEAT OUTPUT | 13,000 kcal/h |
| TANK CAPACITY | 10 LITERS |
| EXTERNAL DIMENSION (HxWxD) | 593x310x600 (mm) |
| CONTROL SYSTEM | 5SEC. PREPURGE |
| SAFTY DEVICE | Photocell flame monitor |
| DRY WEIGHT | 18kg |
| ACCESSORY | THERMOSTAT CONNECTOR |
| BTU/ HR | 51, 600 |